|
Install IPSO on PC
out put from my box:
---------------------------------------
part 1:
-----------
>> IPSO boot
Usage: [fd(0,a)]/kernel][-abcCdhrsv]
Boot:
Booting fd(0,a)/kernel @ 0x2e9000
text=0x12f000 data=0x1000 bss=0x0 symbols=[+0x0+0x4+0x27c+0x4+0x279]
total=0x4194fd entry point=0x2e9000
Uncompressing kernel...done
Booting the kernel
[kernel] symtab f0419000, sym_start f0419004, sym_end f0419714
[kernel] sym_size 155555ec, str_size fffffdec
[ kernel symbol table not valid ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Resizing packet buffers: mbufs 15360 clusters 7680
releng 877 12.15.2001-064400
CPU: 133-MHz Pentium 735\90 or 815\100 (586-class CPU)
real memory = 67108864 (64M bytes)
avail memory = 57765888 (55M bytes)
piix0 <Intel 82371SB (PIIX3) PCI to ISA bridge> rev 1 on pci0:7:0
piix1 <Intel 82371SB (PIIX3) PCI to ISA bridge Function> rev 0 on pci0:7:1
Probing for devices on the ISA bus:
sio0 at 0x3f8-0x3ff irq 4 on isa
<5>sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
<5>sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTLA-305020>, LBA, DMA
wd0: 20576MB (40188960 sectors), LBA geometry: 2501 cyls, 255 heads, 63 S/T
wd0: Physical geometry: 16383 cyls, 16 heads, 63 S/T
wdc0: unit 1 (atapi): <RICOH CD-RW MP7400A R107 20020620/R107>, removable, accel, dma, iordis
wcd0: 6890Kb/sec, 2048Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
npx0 on motherboard
npx0: INT 16 interface
rootfs is 1500 Kbyte compiled in MFS
################### IPSO Full Installation ####################
You will need to supply the following information:
Client IP address/netmask, FTP server IP address and filename,
system serial number, and other license information.
This process will DESTROY any extant files and data on your disk.
#################################################################
Continue? (y/n) [n] y
Motherboard serial number is MB-1234567890.
The chassis serial number can be found on a
sticker on the back of the unit with the letters
S/N in front of the serial number.
Please enter the serial number: 123456789
Please answer the following licensing questions.
Will this node be using IGRP ? [y] n
Will this node be using BGP ? [y] n
1. Install from CD-ROM.
2. Install from anonymous FTP server.
3. Install from FTP server with user and password.
Choose an installation method (1-3): 1
Enter path to ipso image file on cdrom [/cdrom/image]: /cdrom/ipso/
Enter ipso image filename on cdrom [ipso.tgz]:
1. Retrieve all valid packages, with no further prompting.
2. Retrieve packages one-by-one, prompting for each.
3. Retrieve no packages.
Enter choice [1-3] [1]:
Checking what packages are available on /cdrom/ipso/
The following packages are available:
ipso.tgz
Building filesystems...
done.
Making initial links...done.
Copying /cdrom/ipso//ipso.tgz to local disk...(no system signature file found, continuing)...done.
No packages found in /cdrom/ipso/, continuing.
mirror: not found
Installing image...done.
Image version tag: IPSO-3.6-FCS6-01.21.2003-230310-1061.
syncing disks... done
Rebooting...
>> IPSO boot
Usage: [wd(0,f)]/kernel][-abcCdhrsv]
Boot:
Booting wd(0,f)/image/IPSO-3.6-FCS6-01.21.2003-230310-1061/kernel @ 0x100000
text=0x295000 data=0x5a000 bss=0x17ac8c symbols=[+0x374+0x4+0x3d854+0x4+0x58fd2]
total=0x60082e entry point=0x100000
[kernel] symtab c056a000, sym_start c056a004, sym_end c05a7858
[kernel] sym_size 5207, str_size 58fd8
[ preserving 0x96830 bytes of kernel symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Resizing packet buffers: mbufs 15360 clusters 7680
releng 1061 01.21.2003-230310
CPU: 133-MHz Pentium 735\90 or 815\100 (586-class CPU)
real memory = 67108864 (64M bytes)
avail memory = 55726080 (53M bytes)
piix0 <Intel 82371SB (PIIX3) PCI to ISA bridge> rev 1 on pci0:7:0
piix1 <Intel 82371SB (PIIX3) PCI to ISA bridge Function> rev 0 on pci0:7:1
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 on isa
<5>sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
<5>sio1: type 16550A
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 92048U8>, LBA, DMA
wd0: 20480MB (40000464 sectors), LBA geometry: 2489 cyls, 255 heads, 63 S/T
wd0: Physical geometry: 16383 cyls, 16 heads, 63 S/T
wdc0: unit 1 (atapi): <RICOH CD-RW MP7400A R107 20020620/R107>, removable, accel, dma, iordis
wcd0: 6890Kb/sec, 2048Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: door open, unlocked
arc(0): unknown rev 0xff
arc(0): Probe failed
arc(1): unknown rev 0xff
arc(1): Probe failed
npx0 on motherboard
npx0: INT 16 interface
changing root device to wd0f
swapon: adding /dev/wd0b as swap device
Automatic reboot in progress...
/dev/rwd0f: clean, 281531 free (643 frags, 35111 blocks, 0.2% fragmentation)
/dev/rwd0a: clean, 38192 free (16 frags, 4772 blocks, 0.0% fragmentation)
/dev/rwd0d: clean, 15323603 free (83 frags, 1915440 blocks, 0.0% fragmentation)
/dev/rwd0e: clean, 2625923 free (27 frags, 328237 blocks, 0.0% fragmentation)
clearing /tmp
checking for core dump...savecore: no core dump
recording kernel -c changes
starting system daemons: syslogd done.
Apr 15 22:05:24 [LOG_NOTICE] kernel: sio0: type 16550A
Apr 15 22:05:24 [LOG_NOTICE] kernel: sio1: type 16550A
Please choose the host name for this system. This name will be used
in messages and usually corresponds with one of the network hostnames
for the system. Note that only letters, numbers, dashes, and dots (.)
are permitted in a hostname.
Hostname? ipso
Hostname set to "ipso", OK? [y]
Please enter password for user admin:
Please re-enter password for confirmation:
You can configure your system in two ways:
1) configure an interface and use our Web-based Voyager via a remote
browser
2) VT100-based Lynx browser
Please enter a choice [ 1-2, q ]: 1
Select an interface from the following for configuration:
1) quit this menu
Enter choice [1-1]: 1
A configured interface is required to run Voyager. Since you did not
select an interface to configure, you will have to use the Lynx browser
for configuration. Simply type "lynx" to start.
Modem detected on /dev/cuaa1.
Enable logins on this modem [y,n]: n
IPSO (ipso) (ttyd0)
login: admin
Password:
Last login: Tue Apr 15 22:07:14 on ttyd0
Apr 15 22:09:56 [LOG_INFO] login: DIALUP ttyd0, admin
Apr 15 22:09:56 [LOG_NOTICE] login: ROOT LOGIN (admin) ON ttyd0
Apr 15 22:09:56 [LOG_NOTICE] login: ROOT LOGIN (admin) ON ttyd0
Apr 15 22:09:56 [LOG_INFO] login: login on ttyd0 as admin
IPSO 3.6-FCS6 #1061: 01.21.2003 230310
Terminal type? [vt100]
ipso[admin]# uname -a
IPSO ipso 3.6-FCS6 releng 1061 01.21.2003-230310 i386
ipso[admin]# df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/wd0f 396952 115421 249775 32% /
/dev/wd0a 38193 25 35113 0% /config
/dev/wd0d 15323720 319 14097504 0% /var
/dev/wd0e 2625926 7 2415845 0% /opt
procfs 4 4 0 100% /proc
ipso[admin]# mount
/dev/wd0f on / (local, read-only)
/dev/wd0a on /config (local)
/dev/wd0d on /var (local)
/dev/wd0e on /opt (local)
procfs on /proc (local) |
