Dynamips Router IOS and PORT ADAPTER supported
Dynamips Router IOS and PORT ADAPTER supported
The following Cisco 7200 Port Adapters (PA) are currently supported:
FastEthernet cards “C7200-IO-FE” and “PA-FE-TX” based on DEC21140 chip
FastEthernet cards “C7200-IO-2FE” and “PA-2FE-TX” based on Intel i8254x chips
GigabitEthernet cards “C7200-IO-GE-E” and “PA-GE” based on Intel i8254x chips
Ethernet cards “PA-4E” and “PA-8E” based on AMD Am79c97x chips
ATM card “PA-A1″ based on Texas Instruments Tneta1570 chip
Serial cards “PA-4T+” and “PA-8T”
POS (Packet over Sonet) card “PA-POS-OC3″ (experimental, only works with recent IOS images)
The following Cisco 3600 (3620,3640,3660) Network Modules (NM) are currently supported:
Ethernet cards: “NM-1E”, “NM-4E” and “NM-1FE-TX”, all based on AMD Am79c97x chips
Ethernet switching module: “NM-16ESW”
Serial card “NM-4T”
The following Cisco 2691/3725/3745 Network Modules (NM) are currently supported:
FastEthernet cards: “NM-1FE-TX”
Ethernet switching module: “NM-16ESW”
Serial card “NM-4T”
The following Cisco 2600 Network Modules (NM) are currently supported:
Ethernet cards: “NM-1E”, “NM-4E” and “NM-1FE-TX”
Ethernet switching module: “NM-16ESW”
Play with This lab:[localhost]
[[2610]]
image = /usr/local/cisco/dynagen-0.9.2/pc/image.bin
ram = 16
slot1 = NM-1E
idlepc = 0×801ea000
[[router PC1]]
model = 2610
[[3640]]
image = /usr/local/cisco/dynagen-0.9.2/pc/3640.bin
ram = 64
confreg = 0×2142
idlepc = 0×60401a54
[[router R1]]
model = 3640
slot1 = NM-4E
F0/0 = PC1 F0/0
[[router R2]]
model = 3640
slot1 = NM-4E
F1/1 = R1 F1/1
[[router PC2]]
model = 2610
F0/0 = R2 F0/0
[[router R3]]
model = 3640
slot1 = NM-4T —> Load 4 Serial interface on Slot 1 ie serial1/0
slot0 = NM-4E —> Load 4 ethernet interface on Slot 0 ie ethernet0/0